AGP Picks
View all

Blastany touts stainless steel shot wear resistance for surface finishing

Nov. 3, 2026
Blastany touts stainless steel shot wear resistance for surface finishing
By AI, Created 06:32 UTC, Nov 03, 2026, AGP -

Blastany, the brand of Jinan Junda Industrial Technology Co., Ltd., is pitching its stainless steel shot products as a longer-lasting alternative for blasting and surface preparation. The company says wear resistance, lower contamination and less downtime can cut costs for manufacturers working with stainless steel, aluminum and other non-ferrous parts.

Why it matters: - Wear resistance is a direct cost driver in blasting operations because faster abrasive breakdown means more replenishment, more downtime and less consistent surface finishes. - For manufacturers working on stainless steel, aluminum-zinc die castings and precision cast parts, abrasive choice affects product quality, corrosion risk and operating efficiency. - Blastany positions stainless steel shot as a way to reduce iron contamination on non-ferrous metals and avoid secondary rusting or galvanic corrosion.

What happened: - Blastany, the brand of Jinan Junda Industrial Technology Co., Ltd., published a product evaluation focused on premium stainless steel shot wear resistance. - The company highlighted two product lines: atomized stainless steel shot and cut wire stainless steel shot. - Blastany said technical evaluations, material specifications and testing samples are available through the company's official portal.

The details: - Atomized stainless steel shot is made using molten metal processing and rapid solidification. - The atomized particles are spherical, dense and described as free of internal voids. - Blastany said the uniform microstructure helps distribute impact energy evenly and keeps degradation low. - The atomized shot is designed for precision blasting of aluminum profiles, decorative components and thin-walled castings. - The company said atomized shot produces minimal dust and uses less material over time. - Cut wire stainless steel shot is made by drawing stainless steel wire to a precise diameter, then shearing and round-conditioning it. - Blastany said cut wire shot has a uniform grain structure and high tensile strength. - The company said cut wire shot lasts about three to five times longer than conventional cast steel abrasives. - Blastany said cut wire shot is suited to heavy-duty work such as removing heavy oxide scale from copper, aluminum, zinc and stainless steel workpieces. - The company said the abrasive range runs from 0.1 mm to 1.4 mm. - Blastany said the size range helps support surface consistency before coating or anodizing.

Between the lines: - The product pitch centers on total cost of ownership, not just upfront abrasive price. - Longer life can reduce maintenance interruptions, waste volume and disposal needs. - The article frames atomized shot as the precision option and cut wire shot as the aggressive cleaning option, with blending used for mixed requirements. - Blastany also stresses that stainless steel shot can preserve material purity better than standard steel shot on non-ferrous substrates.

What's next: - Blastany says it offers technical consulting to match abrasive type and blend ratio to workpiece hardness and roughness targets. - The company is steering buyers toward custom selection based on geometry, scale removal needs and finish requirements. - Industrial users seeking lower surface-treatment costs are the target audience for the company's stainless steel shot portfolio.

The bottom line: - Blastany is trying to turn wear resistance into a broader value proposition: fewer replacements, cleaner surfaces and less corrosion risk for high-end finishing operations.

Disclaimer: This article was produced by AGP Wire with the assistance of artificial intelligence based on original source content and has been refined to improve clarity, structure, and readability. This content is provided on an “as is” basis. While care has been taken in its preparation, it may contain inaccuracies or omissions, and readers should consult the original source and independently verify key information where appropriate. This content is for informational purposes only and does not constitute legal, financial, investment, or other professional advice.

Sign up for:

Today in Energy

The daily local news briefing you can trust. Every day. Subscribe now.

By signing up, you agree to our Terms & Conditions.

Share this page:

Advanced Search Options

Search for:

Search scope:

Type:

Search in:

Date range:

The last

Sort by:

Sign up for:

Today in Energy

The daily local news briefing you can trust. Every day. Subscribe now.

By signing up, you agree to our Terms & Conditions.